Monday, December 3, 2012

Minibloq translated to Malay Language!

Minibloq has been translated to Malay Language! We want to say thanks to Hazizul Krilp for his great contribution to the project. The complete translation (including tooltips) is available from the Downloads page as a separate package (this is the direct link). The steps to add this kind of package to Minibloq are pretty simple, and can be found in this post. As always, all the names of the people who is helping with the project are mentioned in the Credits webpage. Here we want to share a screenshot showing the work of Hazizul:

Posted by at

10 comments:

  1. kelanangDecember 16, 2012 at 5:44 AM

    Interesting, iam Malaysian, can i use this software for my micro controller box(arduino compatible)?

    ReplyDelete
  2. JuliánDecember 16, 2012 at 12:37 PM

    Hi Kelanang, the answer is yes: if you have a controller compatible with Arduino Uno, or Duemilanove, or Mega, then you should be able to use Minibloq with it.

    ReplyDelete
  3. AlgojoDecember 18, 2012 at 5:49 AM

    There's no such language as Malaysian.

    It's either Malay Language or Malaysian Malay.

    ReplyDelete
  4. JuliánDecember 18, 2012 at 10:23 AM

    Thanks! I edited it, is it ok now?

    ReplyDelete
  5. kelanangDecember 25, 2012 at 12:32 AM

    Julian, I try already MiniBloq with atmega 168. Its really great, thanks to You and Hazizul(translator).Its it possible to change the digital port addresses? for example port 10 from M1_dir0 to servo1.(iam building atmega 168 kit)

    ReplyDelete
  6. JuliánDecember 26, 2012 at 10:27 AM

    Hi kelanang, thanks, You can modify some files to change the pins associated to hardware blocks. Please take a look to those links about custom blocks:

    http://minibloq.net/forum/viewtopic.php?f=10&t=8
    http://blog.minibloq.org/p/development.html

    There may be more information in the forum also: http://minibloq.net/forum/

    Cheers!
    Julián

    ReplyDelete
  7. kelanangDecember 26, 2012 at 11:21 AM

    Thanks Julian for your quick response.Your works are awesome.I planning to use your software for Robotic Club at secondary school in my country.

    ReplyDelete
  8. JuliánDecember 26, 2012 at 11:34 AM

    Thanks Kelanang! Keep in touch!

    ReplyDelete
  9. UnknownDecember 26, 2012 at 12:26 PM

    Edit at minibloq.h in adruino ATmega 168 right?

    ReplyDelete
  10. JuliánDecember 26, 2012 at 12:50 PM

    You can use as a base the Arduino Duemilanove mega168 board, and edit the files main.board and \Core\Minibloq.h in the subdir (under the Minibloq's installation path): \Components\Minibloq\Lib\CPP\Targets\ArduinoDuemilanove168_Arduino.v1.0
    Enjoy!
    Julián

    ReplyDelete

Note: Only a member of this blog may post a comment.

Subscribe to: Post Comments (Atom)