Monday, May 2, 2011

Kickstarter campaign launched!

FUNDING SUCCESSFUL! Yesterday Minibloq successfully raised its funding goal @Kickstarter. Thanks! I will have news soon.


UPDATE #3: Yesterday we have reached our Kickstarter goal. Many thanks again for all your support!

UPDATE #2: Thanks to Sparkfun for their support! Here is a link to the article in their blog.

UPDATE #1: Thanks to Seeedstudio for their support. Seeeduino is going to be included in the official Minibloq package. Here is a link to the article in their blog too.

Today is a great day! the release is coming! This is the link to Minibloq in Kickstarter:



Any help making this public (Twitter, Facebook, blogs...) is very very welcome and will accelerate the project. Thanks!
Posted by at

25 comments:

  1. AnonymousMay 13, 2011 at 6:38 PM

    I am wondering if it would be possible to use Minibloq from an iPad because I would rock. Not sure if that is feasible (hard- and software wise) but that could be Garageband for Robots.

    ReplyDelete
  2. JuliánMay 15, 2011 at 3:40 AM

    Hi Andreas, currently I don't have experience programming iOS based devices like iPad. But as Minibloq is programmed in C++, I think it may be possible once the sources becomes published, with help from the community.

    ReplyDelete
  3. Everton RodriguesMay 23, 2011 at 6:35 PM

    Olá Julián,

    Eu participo de um forum de discussão sobre robótica aqui do brasil,voce poderia divulgar o minblog nele.

    O site é este: www.robocore.net

    Boa sorte

    Até mais!

    ReplyDelete
  4. JuliánMay 23, 2011 at 6:45 PM

    Olá Everton, obrigado!
    O que devo fazer? Eu não falo Português muito bem, English pode ser?
    Saudações!
    Julián

    ReplyDelete
  5. Everton RodriguesMay 24, 2011 at 5:36 PM

    Olá Julián,

    Pode postar em ingles sim!

    O site pode ser visualizado ja em inglês

    http://www.robocore.net/index.php?newlang=english

    É necessário voce ser registrado no site, mas isto é muito simples free.

    fique a vondade para postar lá, comente sobre o miniblog sera muito bem vindo, e de grande ajuda.

    Até mais

    ReplyDelete
  6. JuliánMay 24, 2011 at 6:19 PM

    Obrigado Everton!
    Até mais!
    Julián

    ReplyDelete
  7. JuliánMay 24, 2011 at 6:37 PM

    Hi Everton! I registered there as a user, but there is no software section in the forum. Which section do you think is better?
    Obrigado!
    Julián

    ReplyDelete
  8. Everton RodriguesMay 24, 2011 at 11:13 PM

    Hello Julián,

    Posted in General, Other business.

    What do you think?

    write in English! Will be very welcome.

    The link to post is this: http://www.robocore.net/modules.php?name=Forums&file=viewforum&f=9

    Even more.

    ReplyDelete
  9. JuliánMay 25, 2011 at 11:42 AM

    Hello Everton, I made the post, you can see it here:

    http://www.robocore.net/modules.php?name=Forums&file=viewtopic&t=2917

    Thanks!

    ReplyDelete
  10. AnonymousMay 26, 2011 at 1:06 PM

    Congratulation on hitting the targets.

    ReplyDelete
  11. PadillaJune 6, 2011 at 9:40 PM

    No soy ingeniero, ni un niño ya... pero no puedo esperar a ver esto...! felicidades por alcanzar el funding necesario...!
    Cuando reciba el salario te aportare para asegurarme una copia de primera mano.

    ReplyDelete
  12. MarkJune 6, 2011 at 11:04 PM

    I'd "like" a Facebook page if you create one for the project. It would be a nice way to keep up as well.

    ReplyDelete
  13. JuliánJune 6, 2011 at 11:15 PM

    Gracias Padilla por tus comentarios! Estoy trabajando lo más rápido que puedo para tenerlo listo. Aquí en el blog voy a ir subiendo novedades. ¡Saludos!
    Julián

    ReplyDelete
  14. JuliánJune 6, 2011 at 11:17 PM

    Thanks Mark! I want to create one soon. Anyway, someone has already created one, but it wasn't me.
    Regards!
    Julián

    ReplyDelete
  15. Florin9doiJune 8, 2011 at 4:08 AM

    Vaporware, Vaporware, Vaporware, Vaporware, Vaporware, Vaporware, Vaporware, Vaporware, Vaporware

    ReplyDelete
  16. JuliánJune 8, 2011 at 10:28 AM

    Hi florin9doi, what do you mean?

    ReplyDelete
  17. AnonymousJune 9, 2011 at 10:13 AM

    Julián,

    is it possible that you send me the language
    resources file in advance?
    Then I can start to translate it to german
    for the first release version.
    Or is it already available in german?

    Yours
    Uhrheber

    ReplyDelete
  18. JuliánJune 9, 2011 at 12:14 PM

    Hi again, there is still a lot of hardcoded things in the internationalization subsystem. I can send them once the whole thing reaches a more finished state. Is it ok for you?
    Thanks!
    Julián

    ReplyDelete
  19. AnonymousJune 10, 2011 at 5:13 AM

    Sure.
    I wanna help, not cause more work.

    Yours
    Uhrheber

    ReplyDelete
  20. AnonymousJune 10, 2011 at 6:48 AM

    BTW:
    I opened the chat channel #minibloq at freenode net, and installed an eggdrop bot for it on my server.
    I hope you don't mind.
    I'll give you the full rights for the bot as soon as we establish contact.

    cu
    Uhrheber

    ReplyDelete
  21. JuliánJune 10, 2011 at 9:28 AM

    Hi Uhrheber, I have sent you an e-mail. Please tell me if you have received it.
    Thanks!
    Julián

    ReplyDelete
  22. auziemanJune 16, 2011 at 7:59 PM

    I would love to try this out with my kids / bots! This looks very user friendly!

    Great job, good work, cant wait to download / try it.

    ReplyDelete
  23. JuliánJune 16, 2011 at 11:35 PM

    Thanks Auzieman. It will become public soon.

    ReplyDelete
  24. JuliánOctober 23, 2011 at 12:18 PM

    Hi! Minibloq.v0.8.Beta has been released today, please take a look at the Downloads.

    Cheers!
    Julián

    ReplyDelete
  25. UnknownNovember 30, 2012 at 3:28 AM

    i want to measure the area of circle using minibloq v0.81.beta software
    using arduino uno. Give me some ideas about how to display the area in my bot and how to do the program

    ReplyDelete

Note: Only a member of this blog may post a comment.

Subscribe to: Post Comments (Atom)